Pro Cue Single Splice Ovangkol and Veneer
This design is a Pro Cue Single Splice Ovangkol and Veneer which is thick in snow gum or maple. The Pro Cue of ours uses a piece of ash in this case from ferrule to butt end unlike a standard one piece which uses a 44-48 inch shaft with splicing added. This method decreases the flex in the butt and makes it a much stronger cue than a standard one piece cue.
Mosts manufactures of cues aren’t using a full ash core and either dowel it to look like it or use the 48 inch shafts which is far less costly to make.
Playability it takes the flex out of the butt and provides a better overall feel to the shot than anything else around. For making the cue it costs three times as much to make as its much harder to find a shaft good enough to use and also has the length required to make one.
This listing has various selections as per the cue specifications. Once you check the cue images you’ll notice the great craftsmanship of our cue makers. There’s many selections available on the configuration area and if your wanting to design your own then check it out.
The Ash we use in North American and has a very good age as you’ll see from the images on-line that we select the best around.
- CC- 378 – 57.55 length, 9.55 ferrule, 29.29 butt, 16.6 balance point and a weight of 17.95 ounces|+ 23 inch telescopic, 6 inch solid extension and Cue Case
- CC -394 – 57.5 length, 9.62 ferrule, 29.12 butt, 16.6 balance, 18.23 weight |+ 23 inch telescopic, 6 inch solid extension and Cue Case – SOLD
- For all Cue Creator® cues purchased we’re also giving a free Aluminum cue case so we have peace of mind when sending.